Specifications

TUBE REDUCING ODs

1/32" to 1.0 mm

1/16" to 2.0 mm

1/8" to 3.0 mm

Material:

These nuts are for use with all standard Valco internal fittings and most valves. They also may be used with fittings from other manufacturers. The medium and long types are ideal for metal Valco and Cheminert® valves with more than 8 ports, or where the fitting head may be otherwise inaccessible.

They are sized for use with 1/32", 1/16", and 1/8" OD tubing, and are available in different lengths.

For more information on stainless steel, refer to Properties of Metals

TECH TIP

Using nuts with different lengths will create more space for easier wrench access.

Specifications

For 1/32", 1/16", and 1/8" OD tubing

Pressure rating with premium SS tubing and ZF1S6 ferrule:

1,375 bar (20,000 psi)

(Varies with tubing material and ID)

Material: Type 303 Stainless steel

Threads:

See Also

Valco ferrules

Stainless steel tubing

ValvTool for tightening hex-head fittings

Color-It Adapters

Color Sleeve Fingertight Adapter

Replacement ferrules for VICI Jour Imperial to Metric UHPLC Stainless Reducing Unions. Using these unions, metric tubing can be connected to imperial fittings, valves and chromatographic systems.

• Ultra-high pressure
• For 1 mm, 2 mm, and 3 mm OD tubing
• Type 303 stainless steel

Use a plug to close off an unused port in a valve, manifold, or HPLC column. The standard stainless plug consists of a zero-volume nut with a ferrule made from a piece of solid rod.

Use a cap to close off a tube that already has a ferrule and internal nut. A cap is essentially a piece of hex stock with a zero-volume fitting detail machined into it, minus the through-hole.

For more information on stainless steel, refer to Properties of Metals

Specifications

For 1/16" and 1/8" fittings

See Also

ValvTool for Tightening Hex-Head Fittings

Open-End Wrench